-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Estimated reading time: Less than a minute
Contact Columnist Form
Connecting the Dots: Nothing's Perfect - Understanding Tolerance
by Jack Olson
Yes, nothing’s perfect.
We designers do our best to maintain accuracy, but the real world produces imperfections:
- Our CAD systems assume that a drill is perfectly centered in a round pad. It never is.
- We declare specific trace widths, but when we measure them on an actual board they are always slightly thinner or thicker.
- Multiple layers are perfectly aligned on our computer screens, but the fabricators can never quite manage to duplicate it. There will always be some misregistration.
- The board design is assumed to be flat, but boards in the final product can be bowed or warped.
- We designate some traces to be impedance controlled, but our measurements differ.
I could go on and on and on, but I think you see the point. As designers, we calculate exact numbers. We design with precision. Our CAD systems show us the ideal board. In the real world, however, nothing is so precise. The final product will vary from the ideal in one way or another, but hopefully in ways that are harmless.
Editor's Note: This column originally appeared in the May 2013 issue of The PCB Design Magazine.
More Columns from Various Archived Columns
Slash Sheet Chaos: Is What You See, What You Get?Moisture in Materials: Avoiding Process Gremlins
Material Witness: Beat the Heat--A Non-Math Intro to Thermal Properties
Material Witness: Considerations in Using TC Materials for PWBs
Material Witness: Are Your Materials Up to the Challenge?
Material Witness: Thermal Oxidation of Materials, Part I
Material Witness: Thermal Oxidation of Materials, Part II
Material Witness: R.I.P. Speedboard C